Digital Measuring Instrument

AC-DC Digital Panel Meter

SPECIFICATION SINGLE FUNCTION , SINGLE RANGE DISPLAY : 3 Digit LED 12.5mm High RESOLUTION : 1 in 1999 Count BASIC ACCURACY : ± 0.1% ± 1 Digit OPERATING VOLTAGE : 230V AC ± 10% OR 110V ± 10% AC / 12V DC For DC Range (Optional)

Digital Watt Meter

SPECIFICATION A) Input Voltage : 20-300V B) Input Current : 5mA to 2 A / 20mA to 5A / 80mA to 10A / 100mA to 20A( Any One) (other ranges available on request) C) Accuracy : Class 1.0 D) Panel Dimensions : 96 X 96 X 85 mm E) Auxiliary : 230 V ± 20% F) Applicable at all Power Factor

Digital Portable Meter

SPECIFICATION SINGLE FUNCTION , SINGLE RANGE DISPLAY : 3 Digit LED 12.5mm High RESOLUTION : 1 in 1999 Count BASIC ACCURACY : ± 0.1% ± 1 Digit OPERATING VOLTAGE : 230V AC ± 10% OR 110V ± 10% AC DC VOLTAGE : 0 To ± 199.9mV or ± 1.999V or ± 19.99V or ± 199.9V or ± 1000V AC VOLTAGE : 0 To 199.9mV or 1.999V or 19.99V or 199.9V or 750V DC CURRENT : 0 To ± 199.9A or ± 1.999mA or ± 19.99mA or ± 199.9mA or ± 1.999A or ± 19.99A AC CURRENT : 0 To 199.9A or 1.999mA or 19.99mA or 199.9mA or 1.999A or 19.99A

9025 INSULATION TESTER

SPECIFICATION Measurement Voltage : 500V/1000V/2500V Insulation Resistance : 0.5M„ 40G„ Accuracy : 400k„200M„±3%±5,200M4G„±5%±5,4G40G„±10%±5 Short circuit current 1.5mA or more Measurement time 1/2/10 Minutes

Digital Multimeter 97

Features - 3 Digital Multimeter - 3999 Counts Large LCD Display with Auto/Manual Range - No Power-OFF under natural operation - Data Hold, Max. / Min. Value Hold

52 C Digital Milli Ohm Meter

53 C Digital Micro Ohm Meter

SPECIFICATION WARMUP Time for rated accuracy = 3 min. INPUT VOLTAGE : 230V AC ± 10% OVER RANGE : Three least significant digit blank & '1™ appears STANDARD ACCESSORIES : Test Lead-Banana to Crocodile Clip One Set Of 4 Leads

Bench Top Digital Multimeter

LED Test Panel

SPECIFICATION ACCURACY : Class 1.0 SOURCE VOLTAGE : 0 - 300V AC /2 A AUX SUPPLY : 230V + 10% & 230V AC For Source DISPLAY : 6 Row - 4Digit Seven Segment Display for AC - Volt, Amp. Watt, Frequency, Powerfactor, THD(A) AND - 3Row 4Digit for DC Volt, Amp., Watt AC Perameters A) INPUT VOLTAGE : 20 - 300 V AC B) INPUT CURRENT : 5mA - 2A C) Wattage : As per Voltage & Current D) THD (A) : 1% of Rated Capicity to Max. Capicity E) Power Factor : 0.4 To 0.4, (lag to lead) F) Frequency : 30.00 to 70.00 Hz DC Perameters A) DC Volt : 5V to 100V B) Amp. : 0 to 5.000 A C) Wattage : upto 500 Watt

4.5 Digital Micro Ohm Meter

SPECIFICATION RANGE OF MEASUREMENT : 1 micro ohm to 19.999 K Ohm in eight ranges WARMUP Time for rated accuracy = 3 min. INPUT VOLTAGE : 230V AC ± 10% OVER RANGE : Three most significant digit blank & '1™ appears STANDARD ACCESSORIES : Test Lead-Banana to Crocodile Clip One Set Of 4 Leads

Million Megohm Meter

SPECIFICATION Accuracy : Within ±5% Test Voltage : Highly stable 100V, 200V, 300V, 400V & 500V DC adjustable accurately with coarse fine control Overload Protection : Input operational amplifier protected against accidental overload in first four ranges Meter : Moving Coil type analog meter having good resolution for measurement of Insulation resistance & voltage Power Supply : 220V ± 10% at 50Hz